ARC-16 Web Interface Support

Dimensions:

1.75" (4.45 cm) H x 19" (48.26 cm) W x 10" (25.4 cm) D

Operating Temperature:

0° to 50° C

Power Requirements:

100 to 240 VAC, 50/60Hz; 20W

Rear Panel Connectors:

Serial Ports:

ARC-16:

For full-time serial link or direct connection to the ARC-16 ESI or CI.

PASS THRU:

Allows connection of multiple accessory devices to the ARC-16.

CONFIG:

Provides PC Link for initial configuration.

RJ-45 Ethernet Port:

Ethernet port connects to LAN/WAN. LEDs show link status and activity.

System Requirements

• 10BaseT LAN connection at the studio or transmitter site
• Static IP address assignable to the Web Interface
• For site access from the Internet, the IP addrses must be public
• Broadband ISP service for access from the public Internet

Note: If the LAN connection is at the studio site and the ARC-16 is located at a remote transmitter facility, the Web Interface requires a full-time bi-directional serial link (1200bps) between the Web Interface at the studio and ARC-16 at the transmitter.

ARC-16 Firmware

• Version 5.0 or higher
• One ESI or CI required per ARC-16 system

 For Web-based Monitoring and Control

• Windows^®-based computer with Internet Explorer 5 or higher, or Mozilla Firefox browser
• Sun Microsystems Java Virtual Machine version 1.4.2 or higher (1.5 recommended)
• 56K Internet access or faster (broadband connection recommended)
• 1024x768 or higher screen resolution recommended

Note: Whilte 56K dialup access will work for a client connection to the Web Interface, the Web Interface itself requires broadband (DSL or faster) speeds to connect to your LAN/WAN.

For AutoPilot^® operation via the Web Interface

• AutoPilot version 2.3 or higher