Serial LAN Extender
This product is no longer available.
Extend the LAN to Remote Locations Over Existing Serial Paths
The SL-1 allows deployment of IP-enabled technologies where traditional Ethernet connectivity is impractical or unavailable. Unlike a serial-to-Ethernet converter, which allows RS-232 devices to operate on an existing Ethernet link, the SL-1 enables new IP connectivity to the remote site.
Broadcasters gain studio access to IP remote control, web-based configuration for remote equipment, and access to email and other studio resources while at the transmitter site – all without additional monthly charges. The SL-1 also provides a new option for sending RDS data to the remote site.
Operating in pairs over a full-time bidirectional serial link, the SL-1 accommodates a wide variety of RS-232 links, including radio, leased line and dial-up, with appropriate modems. To optimize bandwidth efficiency, the SL-1 learns the location of each network device and transports only those packets destined for the opposite side of the bridge. Since the SL-1 bridges both networks onto the same subnet, integration with the existing IT infrastructure is easy.
Dimensions:
1" (2.54 cm) H x 5" (12.70 cm) W x 5" (12.70 cm) D
Operating Temperature:
0° to 50° C
Power:
6VDC wall adapter (provided)
Serial Connectivity:
User configurable from 9.6kbps to 115.2kbps
Ethernet Connectivity:
10BaseT
Key Features
- Brings LAN connectivity to sites where Internet access is not available or practical
- Uses existing serial links with speeds from 9600bps to 115.2kbps
- Requires no configuration and no IP address
- Learns which IP addresses are on the remote end to minimize traffic over the serial link
Datasheets
User Documentation(View all)