Environmental problems in the server room can cause costly downtime, damage expensive equipment, and even lead to loss of mission-critical data. HVAC equipment failure, power outages, and simple human error can cause catastrophic IT problems—especially after hours. Server rooms and data centers of all sizes require comprehensive monitoring of environmental conditions to detect a problem as early as possible.
Climate Guard monitors temperature, humidity, flood/leak, and many other conditions that can cause serious IT disasters. Email, SMS and SNMP notifications ensure that responsible personnel can respond quickly and effectively.
Watch for Early Warning Signs
Not all problems happen suddenly. A change in how equipment behaves over time may be an early warning sign of a serious problem. A gradual rise in temperature or a change in sound level may be evidence of impending equipment failure. Climate Guard’s onboard charting allows you to watch for changes in environmental conditions over time, preventing a problem from becoming a crisis.
A Monitoring Solution that Grows with your Needs
Climate Guard’s unique modular design allows you to add capacity and features as you need them. Easily add new sensors as you add equipment, and take advantage of new functionality when you need it.
Climate Guard can support up to a total of 64 sensors, including 3 built-in sensors, 8 switch inputs connected to the rear panel connector, 8 powered switch inputs and up to 45 digital sensors connected in daisy-chain configuration to the front panel sensor ports. One or two optional modules can be installed in the front of the Climate Guard unit to simplify daisy-chain wiring and/or to increase the number of switch inputs or powered switch inputs, up to an overall total of 64 sensors.
Climate Guard LT is a convenient package providing up to a total of 32 sensors including 3 built-in sensors, 8 powered switch inputs and up to 21 digital sensors connected in daisy-chain configuration to the front panel sensor ports.
See Climate Guard in action: Check out our live demo. (Username: demo, Password: demo)
1.75" (4.45cm) H x 19" (48.26cm) W x 5" (12.7cm) D
-40 to 50° C
10/100 full or half duplex
Climate Guard LT
Expansion Modules (Climate Guard only):
Up to two expansion modules
Front Panel LEDs:
Power, Fault; Ethernet RJ45 LEDs: Link, Activity
Digital Sensor Inputs:
8 built-in ports for digital sensors and powered switch inputs
Switch Inputs (Climate Guard only):
8 switch inputs for contact closures
Temperature, sound, light
HTTP, HTTPS, SMTP, SMTP/SSL, SNMP v1, SNTP
|Climate Guard||Climate Guard LT|
|Built-in web server|
|Built-in sensors||Temperature |
|Powered switch inputs||8||8|
|Max expansion modules||2||0|
* Daisy-chaining allows installation of maximum number of digital sensors.
Part #: TILT SENSOR
Tilt sensor for detecting movement of equipment. For use with Climate Guard or Plus-X EM Series. Use with Sensor Cable or other 6 conductor RJ25 cable.
Part #: MOTION SENSOR
Motion Sensor. Includes pre-wired 14' cable with 6 pin modular RJ-12 connector.
Magnetic Door Contact
Part #: DOOR CONTACT
Magnetic surface mount switch for windows and doors to indicate closed or open position. Requires 2-conductor cable
Part #: FLOOD DETECTOR
Digital Sensor Cable
Part #: SENSOR CABLE
8 Input Sensor Module
Part #: SENSOR MODULE
Adds 8 additional sensor inputs to the Climate Guard 64 or Plus-X EM64, allowing use of additional temperature, humidity and powered switch input sensors.
100' Switch Input Cable
Part #: 100FT 2-WIRE
Remote Video Camera
Part #: RVM-10
RJ-25 Phone Line Coupler
Part #: RJ25 COUPLER
Part #: HUMIDITY SENSOR
Temperature/Humidity Sensor Digital temperature and humidity sensor for Climate Guard or Plus-X EM series. Humidity ranges from 0–100% RH. Temperature accuracy for Rev C sensors is ±0.5° C from -10° C to 65° C.
Temperature accuracy for Rev A sensors is ±2° C from -10° C to 65° C.
Requires Digital Sensor Cable
Switch Input Module
Part #: SWCH INP MODULE
Adds 8 additional switch inputs for Climate Guard 64 or Plus-X EM64, allowing use of additional 2-conductor sensors such as door contacts, etc.
Part #: SMOKE DETECTOR
Smoke Detector for use with Climate Guard or Plus-X EM series. For use as a supplemental smoke detector only. Includes pre-wired 14' cable with 6 pin modular RJ-12 connector.
RJ-25 Phone Line Splitter
Part #: RJ25 SPLITTER
Part #: TEMP-INDOOR
The TEMP-INDOOR Sensor is a general-purpose, digital, indoor temperature sensor tailored for monitoring ambient temperatures within a room or in an equipment rack. Cables are not supplied with this sensor — order 25’ RJ-12 cable, part number SENSOR CABLE.
Part #: TEMP-WALLMOUNT
The TEMP-WALLMOUNT Sensor is housed in a 2 5/8” x 5” enclosure with air vents to facilitate sensing of the environment.14’ of cable is provided with an RJ-12 connector on one end. The TEMP-INDOOR has a large, easy to connect barrier strip that accommodates flat or Phillips type screwdrivers
Part #: TEMP-OUTDOOR
The TEMP-OUTDOOR digital outdoor temperature sensor is included with the BTU‐4D/BTU-4D-I systems, and is intended for general purpose monitoring of equipment or ambient temperatures. The TEMP-OUTDOOR sensor is attached to 25’ of cable with an RJ-12 connector on the end. The sensor has a mounting ring and gasket to accommodate #6 or #8 hardware. The sensing elements are sealed for added protection from dirt and moisture.
Part #: TEMP-STACK
The TEMP-STACK Sensor is a digital stack temperature sensor designed for sensing heat within the air ducting of your equipment. The TEMP-STACK Sensor is attached to 25’ of cable with an RJ-12 connector. The sensor is mounted in the tip of a 3/8” diameter chrome tube. The supplied mounting hardware consists of a base and a compression fitting to allow the sensor to be secured at variable depths. This allows the installer to locate the sensor up to 9 1/2” from the equipment wall, well within the airflow being monitored.
Powered Switch Input Cable
Part #: PWR INP CABLE
14' 6-conductor cable with an RJ-12 connector on one end and terminal lugs on the other end.