Complete your system with the following peripheral equipment, or add site monitoring accessories to collect additional data from your operation.

Quick Jump... PlusConnect Interface Integrated Input Unit (IIU) Integrated Command Relay Unit (ICRU) ESI Plus Enhanced Speech Interface

---

Plus-X AC-8

The Plus-X AC-8 remote outlet controller makes it easy to manage power to 120V equipment at remote locations. Connect the Plus-X AC-8 to PCs, servers and other IT or broadcast equipment, and save wasted drive time when remote gear needs a power cycle.

Connect the Plus-X AC-8 to the Burk ARC Plus, interface it with an existing transmitter remote control, or operate it in web-only mode. No matter what you choose, the Plus-X AC-8 offers unmatched versatility.

 

---

PlusConnect Interface

The PlusConnect provides a seamless link between the ARC Plus remote monitoring and control system and the Harris Z transmitter series, bringing more than 400 transmitter parameters aboard the ARC Plus. A single serial connection to the transmitter reduces installation time and saves the expense of adding remote control capacity.

By combining the power of the ARC Plus with the convenience of a direct link to the transmitter, the PlusConnect allows broadcasters to manage the entire transmission plant, studio, and IT infrastructure on a single platform.

 

---

Integrated Input Unit (IIU)

Each Integrated Input Unit (IIU) connects 16 metering and 16 status channels to the ARC Plus.

---

Integrated Command Relay

Each Integrated Command Relay Unit (ICRU) facilitates the connection of 8 command channels to the ARC Plus (8 raise and 8 lower relays).

---

ESI Plus – Enhanced Speech Interface

The ESI Plus provides telephone dial-up control and dial-out alarm notification. Installed inside the ARC Plus main unit, the ESI Plus adds a line jack to the rear panel of the ARC Plus for connection to a POTS line. This allows operators to dial the telephone number associated with the phone line, enter a passcode, and then take readings and issue commands for any site linked to the ESI. When configured to do so, the ESI will also dial out to alert operators to alarm conditions.