Dimensions:

Height:

1.75" (4.45 cm) – 1 RU

Width:

19" (48.26 cm)

Depth:

11" (27.94 cm)

Power Requirements:

110 VAC, 50/60Hz; 30W. 220 VAC available.

Source Inputs:

Six Stereo Inputs:

Nominal level: +8, +4, 0, -10dBM; Maximum level: +28dBM with nominal +4dBM setup.

Common Mode Rejection

>110dB below 1 KHz, >70dB at 20KHz. No level or CMR trimming required.

Impedence:

50k ohms CMR or gain unaffected by source impedance imbalances.

Channel Off Isolation:

>110db, 20-20KHz

Soft Switch Time:

3.5 milliseconds

Connectors:

Individual connectors including audio, remote control and machine-follow-audio for each input. Start and stop pulses provided for machine control. READY status and control available on connector. COMBICON plug-in screw type connectors install easily with a screwdriver.

Loop Input:

Nominal level: +4dBM; Maximum level: +26dBm; Impedence: 25k ohms balanced CMR, noise and distortion same as main inputs.

Control:

Access to all functions via front panel control and remote control connector. Operating mode (select or mix), processor loop, ready or locked modes may be controlled and monitored by remote control.

Modes:

MIX On:

Selection of unlit source adds source to output. Selection of lit source removes source from output.

MIX Off:

Selection puts source on output and cancels all other sources. May be strapped for alternate action.

Ready On:

Local and remote control of selection, mix and loop functions is available.

Ready Off:

Local and remote control of all functions are locked.

Loop On:

Processor loop is connected to stereo outputs.

Loop Off:

Processor loop is bypassed.