AutoPilot® 3.0.x

Minimum System Requirements:

• Windows® XP, 2000 Pro. SP1
• 1GHz or higher processor
• 256MB RAM
• 100MB free hard drive space
• Microsoft Internet Explorer 4.01 SP2 or higher
• Available COM port for each direct cable connection
• Bell 212A compatible modem for dial-up modem connection
• 1024x768 (or higher) screen resolution recommended
• ARC-16 firmware version 5.0 or higher (5.4 or higher recommended)

Upgrading from AutoPilot 2.x:

Installing AutoPilot 3 on a computer with an existing AutoPilot 2 installation will remove AutoPilot 2 program files, but will not remove your existing configuration files and scripts. Your configuration files can be upgraded to use with AutoPilot 3.

To automatically upgrade your existing configuration (recommended), install AutoPilot 3 to your AutoPilot 2 folder. Your configuration files will be updated automatically when you run AutoPilot 3 for the first time.

If you choose to install AutoPilot 3 to the default location, or want to use an AutoPilot 2 configuration from a different computer, you will need to copy your existing AutoPilot 2 configuration files (config.mdb and history.mdb) and scripts to the AutoPilot 3 directory. Your configuration files will be updated automatically when you run AutoPilot 3 for the first time.

Important! Once your configuration files have been upgraded for AutoPilot 3, you will not be able to use them with AutoPilot 2. It is recommended that you make a copy of your AutoPilot 2 databases (config.mdb and history.mdb) prior to installing AutoPilot 3. Your script files do not need to be upgraded and can be used in either version.

Installation Instructions:

1. After the download is complete, double-click the setup file to begin the installation. The installer will automatically uninstall AutoPilot 2.x if installed.
2. Enter your program key when prompted and follow on-screen instructions to complete the install.

Note: Entering an AutoPilot 2 program key will allow you to install the program and evaluate it for 30 days only. AutoPilot 3 requires a new program key and authorization codes. Please contact our sales department for information on upgrading to AutoPilot 3.

To run AutoPilot after the installation is complete, double-click the desktop icon or launch it from the Start Menu at Programs > Burk Technology > AutoPilot 3.

Demo Mode:

AutoPilot 3 can be installed as a fully-functioning demo for 30-days. If you are an AutoPilot 2 user, you can activate demo mode by entering your existing program key during installation. New users can evaluate AutoPilot 3 by entering fourteen (14) zero's as the program key.