STM-4D ARC Solo Temperature Module


The STM-4D enables the ARC Solo rear-panel sensor input for up to four metering channels for use with all Burk Technology digital temperature sensors. The STM-4D comes with a free TEMP-OUTDOOR digital temperature sensor.

TEMP-INDOOR Sensor

Part #: TEMP-INDOOR

The TEMP-INDOOR Sensor is a general-purpose, digital, indoor temperature sensor tailored for monitoring ambient temperatures within a room or in an equipment rack. Temperature accuracy: ±0.5° C from -10° C to 85° C. Cables are not supplied with this sensor. Order 25’ RJ-12 cable, part number SENSOR CABLE.

For use with Climate Guard and Plus-X EM Environmental Monitors, ARC Plus systems equipped with a Plus-X EM unit, and ARC Solo systems equipped with the STM-4D Temperature Module option.

TRI-TEMP Sensor Array

Part #: TRI-TEMP

TRI-TEMP is ideal for monitoring heat rise in equipment racks. Three temperature sensors are pre-wired in series at 3’ intervals for mounting at the bottom, middle and top of a rack to provide a real-time temperature profile. A single 12’ pigtail is provided to connect TRI-TEMP to Burk Climate Guard, Plus-X EM or STM-4D. Temperature accuracy: ±0.5° C from -10° C to 85° C.

For use with Climate Guard and Plus-X EM Environmental Monitors, ARC Plus systems equipped with a Plus-X EM unit, and ARC Solo systems equipped with the STM-4D Temperature Module option.

TEMP-OUTDOOR Sensor

Part #: TEMP-OUTDOOR

The TEMP-OUTDOOR digital temperature sensor is intended for outdoor or indoor monitoring of equipment or ambient temperatures. Temperature accuracy: ±0.5° C from -10° C to 85° C. The TEMP-OUTDOOR sensor is attached to 25’ of cable with an RJ-12 connector on the end. The sensor has a mounting ring and gasket to accommodate #6 or #8 hardware. The sensing elements are sealed for added protection from dirt and moisture. 

For use with Climate Guard and Plus-X EM Environmental Monitors, ARC Plus systems equipped with a Plus-X EM unit, and ARC Solo systems equipped with the STM-4D Temperature Module option.

TEMP-STACK Sensor

Part #: TEMP-STACK

The TEMP-STACK Sensor is a digital stack temperature sensor designed for sensing heat within the air ducting of your equipment. Temperature accuracy: ±0.5° C from -10° C to 85° C. The TEMP-STACK Sensor is attached to 25’ of cable with an RJ-12 connector. The sensor is mounted in the tip of a 3/8” diameter chrome tube. The supplied mounting hardware consists of a base and a compression fitting to allow the sensor to be secured at variable depths. This allows the installer to locate the sensor up to 9 1/2” from the equipment wall, well within the airflow being monitored.

For use with Climate Guard and Plus-X EM Environmental Monitors, ARC Plus systems equipped with a Plus-X EM unit, and ARC Solo systems equipped with the STM-4D Temperature Module option.

TEMP-WALLMOUNT Sensor

Part #: TEMP-WALLMOUNT

The TEMP-WALLMOUNT Sensor is housed in a 2 5/8” x 5” enclosure with air vents to facilitate sensing of the environment. Temperature accuracy: ±0.5° C from -10° C to 85° C. A 14’ cable is provided with an RJ-12 connector on one end. The TEMP-INDOOR has a large, easy to connect barrier strip that accommodates flat or Phillips type screwdrivers.

For use with Climate Guard and Plus-X EM Environmental Monitors, ARC Plus systems equipped with a Plus-X EM unit, and ARC Solo systems equipped with the STM-4D Temperature Module option.


Ordering information

Part #Product
STM-4DSTM-4DRequest quote

The STM-4D enables the ARC Solo sensor input for up to four metering channels for use with all Burk Technology digital temperature sensors. Includes one TEMP-OUTDOOR digital temperature sensor with pre-wired 25' cable, one four-way RJ11 (6P4C) cable adapter and module activation key. Include unit serial number with order.

TEMP-INDOORDigital Indoor Temperature SensorRequest quote

Digital indoor temperature sensor for use with BTU-4D, BTU-4DI, STM-4D, Climate Guard and Plus-X EM

TEMP-RACK-3Digital Rack Temperature Sensor ArrayRequest quote
Three digital temperature sensors pre-wired in series at 3' intervals for rack temperature measurement. For use with Climate Guard, Plus-X EM and STM-4D.
TEMP-OUTDOORDigital Outdoor Temperature SensorRequest quote

Digital outdoor temperature sensor for use with BTU-4D, BTU-4DI, STM-4D, Climate Guard and Plus-X EM

TEMP-STACKDigital Stack Temperature SensorRequest quote

Digital stack temperature sensor for BTU-4D, BTU-4DI, STM-4D, Climate Guard and Plus-X EM

TEMP-WALLMOUNTDigital Wallmount Temperature SensorRequest quote

Digital wallmount temperature sensor for use with BTU-4D, BTU-4DI, STM-4D, Climate Guard and Plus-X EM