Now it’s easier than ever to monitor and control equipment in all areas of the facility using simple, Ethernet-based connectivity. The Plus-X 300 eight-channel I/O interface adds eight metering or status inputs and eight relay outputs to any new or existing ARC Plus remote control system, providing a versatile, cost-effective expansion path.
Thanks to IP connectivity between the Plus-X 300 and the ARC Plus, installation is straightforward. Sample voltages connect directly to the Plus-X 300 using the included Phoenix-type connectors. There is no need for external breakout panels.
Dimensions:
9.2" (23.37 cm) W x 1.35" (3.43 cm) H x 3.85" (9.78 cm) D
Status Inputs:
0-28VDC or switch closure; User-configurable set points for hysterisis
Analog Inputs:
0-10VDC, 10mV resolution
Mounting:
Mountable on surface or on wall with hardware cutouts
Plus-X IIU | Plus-X ICRU | Plus-X 300 | Plus-X 600 | Plus-X Dual IP-8 Adapter | |
Number of metering inputs | 16 | 0 | up to 8** | 8 | 8 or 16*** |
Number of status inputs | up to 32* | 0 | up to 8** | 16 | 8 or 16*** |
Number of Form-C relays | 0 | 8 pairs | 8 | 6 pairs | 8 or 16 pairs*** |
* 16 dedicated status inputs, and 16 metering or status inputs
** 8 inputs, selectable as metering or status
*** The Plus-X Dual IP-8 Adapter uses the metering, status and relay channels from up to two existing ARC-16 IP-8s.
Line Voltage Sensor
Part #: LVS
Monitor AC Power Circuits
Each LVS monitors a single phase AC power circuit and provides a low-voltage DC output sample that tracks linearly with the AC input voltage. Additional LVS units can be added to monitor multi-phase AC power systems.
AC Current Sensor
Part #: 910-093-001
Combined Transformer and Signal Conditioner
The AC Current Sensor combines a transformer and a signal conditioner into one package. The AC Current Sensor has a selectable input range and an industry standard 0-5VDC output. The AC Current Sensor is designed for application on "linear" or sinusoidal AC loads and is housed in a solid-core case.
Magnetic Door Contact
Part #: DOOR CONTACT
Magnetic surface mount switch for windows and doors to indicate closed or open position. Requires 2-conductor cable
Tower Light Monitor
Part #: TLM
The TLM is a universal lamp alarm relay designed to sense the failure of flashing or steady incandescent beacon lamps or steady side lights. The toroidal current sensor provides islolation and allows monitoring of more than one line at a time. The TLM energizes when one or more lamps fail. It will monitor the operation of up to four side lights or four beacon lamps.
Tower Light Monitor - LED
Part #: TLM-LED
The TLM-LED is a universal lamp alarm relay designed to sense the failure of flashing or steady LED beacon lamps or obstruction lamps. The TLM-LED energizes when one or more lamps fail. It will monitor the operation of one to eight beacon or obstruction lamps. All monitored lamps must be the same wattage and voltage. When properly integrated with ARC Plus or ARC Solo systems, it provides the remote lamp monitoring protection required by the FAA-AC No: 150/5345-43E.
When a lamp fails, the TLM-LED senses a decrease in current flow. After a 10s trip delay, the onboard LED glows and the two alarm outputs energize. The outputs and the LED are reset when the failed lamps are replaced and the unit is recalibrated. Removing the input voltage de-energizes the output and the LED‘s.
It’s never been easier to connect remote equipment. The ARC Plus supports metering and status inputs via the 16-channel Integrated Input Unit and relay outputs via the 8-channel Integrated Command Relay Unit. In addition, the Plus-X 300 allows Ethernet-based integration of 8 inputs (metering or status) and 8 relay outputs.
Select transmitters connect to the ARC Plus system using the PlusConnect™ series of direct interfaces—no external parallel wiring required.
And for control of 120V equipment at the remote site, the Plus-X AC-8 allows individual control of up to eight outlets.